Investigation of formaldehyde sources and its relative emission intensity in shipping channel environment.

Formaldehyde (HCHO) is considered one of the most abundant gas-phase carbonyl compounds in the atmosphere, which can be directly emitted through transportation sources. Long-Path Differential Optical Absorption Spectroscopy (LP-DOAS) was used to observe HCHO in the river channel of Wusong Wharf in Shanghai, China for the whole year of 2019. Due to the impact of ship activity, the annual average HCHO level in the channel is about 2.5 times higher than that in the nearby campus environment. To explain the sources of HCHO under different meteorological conditions, the tracer-pair of CO and Ox (NO2+O3) was used on the clustered air masses. The results of the source appointment show that primary, secondary and background account for 24.14% (3.34 ± 1.19 ppbv), 44.78% (6.20 ± 2.04 ppbv) and 31.09% (4.31 ± 2.33 ppbv) of the HCHO in the channel when the air masses were from the mixed direction of the city and channel, respectively. By performing background station subtraction at times of high primary HCHO values and resolving the plume peaks, directly emitted HCHO/NO2 in the channel environment and plume were determined to be mainly distributed between 0.2 and 0.3. General cargo ships with higher sailing speeds or main engine powers tend to have higher HCHO/NO2 levels. With the knowledge of NO2 (or NOx) emission levels from ships, this study may provide data support for the establishment of HCHO emission factors.

Amination and crosslinking of acetone-fractionated hardwood kraft lignin using different amines and aldehydes for sustainable bio-based wood adhesives.

Hardwood kraft lignin from the pulping industry is burned or discarded. Its valorization was conducted by subjecting fractionation, amination with ethylenediamine, diethylenetriamine, and monoethanolamine, and crosslinking with formaldehyde or glyoxal to obtain bio-based wood adhesives. Acetone-soluble and insoluble hardwood kraft lignin were prepared and subjected to amination and then crosslinking. Fourier transform infrared, 13C NMR, 15N NMR, and X-ray photoelectron spectroscopy results revealed successful amination with amide, imine, and ether bonds and crosslinking of all samples. Hardwood kraft lignin aminated with diethylenetriamine/ethylenediamine and crosslinked using glyoxal exhibited excellent results in comparison with samples crosslinked using formaldehyde. Acetone-insoluble hardwood kraft lignin aminated and crosslinked using diethylenetriamine and formaldehyde, respectively, exhibited excellent adhesion strength with plywood, satisfying the requirements of the Korean standards. The amination and crosslinking of industrial waste hardwood kraft lignin constitute a beneficial valorization method.

Pollution characteristics, source appointment and environmental effect of oxygenated volatile organic compounds in Guangdong-Hong Kong-Macao Greater Bay Area: Implication for air quality management.

Same as other bay areas, the Guangdong-Hong Kong-Macao Greater Bay Area (GBA) is also suffering atmospheric composite pollution. Even a series of atmospheric environment management policies have been conducted to win the "blue sky defense battle", the atmospheric secondary pollutants (e.g., O3) originated from oxygenated volatile organic compounds (OVOCs) still threaten the air quality in GBA. However, there lacks a systematic summary on the emission, formation, pollution and environmental effects of OVOCs in this region for further air quality management. This review focused on the researches related to OVOCs in GBA, including their pollution characteristics, detection methods, source distributions, secondary formations, and impacts on the atmosphere. Pollution profile of OVOCs in GBA revealed that the concentration percentage among total VOCs from Guangzhou and Dongguan cities exceeded 50 %, while methanol, formaldehyde, acetone, and acetaldehyde were the top four highest concentrated OVOCs. The detection technique on regional atmospheric OVOCs (e.g., oxygenated organic molecules (OOMs)) underwent an evolution of off-line derivatization method, on-line spectroscopic method and on-line mass spectrometry method. The OVOCs in GBA were mainly from primary emissions (up to 80 %), including vehicle emissions and biomass combustion. The anthropogenic alkenes and aromatics in urban area, and natural isoprene in rural area also made a significant contribution to the secondary emission (e.g., photochemical formation) of OVOCs. About 20 % in average of ROx radicals was produced from photolysis of formaldehyde in comparison with O3, nitrous acid and rest OVOCs, while the reaction between OVOCs and free radical accelerated the NOx-O3 cycle, contributing to 15 %-60 % cumulative formation of O3 in GBA. Besides, the heterogeneous reactions of dicarbonyls generated 21 %-53 % of SOA. This review also provided suggestions for future research on OVOCs in terms of regional observation, analytical method and mechanistic study to support the development of a control and management strategy on OVOCs in GBA and China.

Formaldehyde Exposure Racial Disparities in Southeast Texas.

Formaldehyde (HCHO) exposures during a full year were calculated for different race/ethnicity groups living in Southeast Texas using a chemical transport model tagged to track nine emission categories. Petroleum and industrial emissions were the largest anthropogenic sources of HCHO exposure in Southeast Texas, accounting for 44% of the total HCHO population exposure. Approximately 50% of the HCHO exposures associated with petroleum and industrial sources were directly emitted (primary), while the other 50% formed in the atmosphere (secondary) from precursor emissions of reactive compounds such as ethylene and propylene. Biogenic emissions also formed secondary HCHO that accounted for 11% of the total population-weighted exposure across the study domain. Off-road equipment contributed 3.7% to total population-weighted exposure in Houston, while natural gas combustion contributed 5% in Beaumont. Mobile sources accounted for 3.7% of the total HCHO population exposure, with less than 10% secondary contribution. Exposure disparity patterns changed with the location. Hispanic and Latino residents were exposed to HCHO concentrations +1.75% above average in Houston due to petroleum and industrial sources and natural gas sources. Black and African American residents in Beaumont were exposed to HCHO concentrations +7% above average due to petroleum and industrial sources, off-road equipment, and food cooking. Asian residents in Beaumont were exposed to HCHO concentrations that were +2.5% above average due to HCHO associated with petroleum and industrial sources, off-road vehicles, and food cooking. White residents were exposed to below average HCHO concentrations in all domains because their homes were located further from primary HCHO emission sources. Given the unique features of the exposure disparities in each region, tailored solutions should be developed by local stakeholders. Potential options to consider in the development of those solutions include modifying processes to reduce emissions, installing control equipment to capture emissions, or increasing the distance between industrial sources and residential neighborhoods.

Green nanosensor for precise detection of formaldehyde in fruits and vegetables extract.

Present study reports fabrication of a low cost and eco-friendly formaldehyde nanosensor based on green magnetite nanoparticles synthesized using Mango (Mangifera indica L.) tree leaves extract. The formaldehyde is found in air, water and food. When inhaled or consumed formaldehyde has carcinogenic effects on human health. In this study the cyclic voltammetry technique was used to characterize the performance of the nanosensor. The green nanosensor fabricated in this study, to detect formaldehyde, demonstrated good sensitivity (193.4 µA mg-1 Lcm-2) in linearity range 0.03-0.5 mg/L with low threshold detection limit (0.05 mg/L). The green nanosensor also showed shelf life of four weeks without considerable change in the initial peak oxidation current. The real sample analysis was performed in various fruits and vegetables (Litchi chinensis, Syzygium cumini, Solanum lycopersicum and Cucumis sativus). The recovery rates were more than 93 % in sample extracts for formaldehyde detection. The comparison of the nanosensor for detection of formaldehyde with the colorimetric sensor revealed that the green nanosensor reproducibility (RSD = 1.8 %) is better than colorimetric sensor (RSD = 3.23 %). The results from the comparative studies of green nanosensor with colorimetric sensor established the potential of the green nanosensor as a forefront technology for futuristic smart detection of formaldehyde.

Does green mean clean? Volatile organic emissions from regular versus green cleaning products.

Cleaning products emit a range of volatile organic compounds (VOCs), including some which are hazardous or can undergo chemical transformations to generate harmful secondary pollutants. In recent years, "green" cleaners have become increasingly popular, with an implicit assumption that these are better for our health and/or the environment. However, there is no strong evidence to suggest that they are better for indoor air quality compared to regular products. In this study, the VOC composition of 10 regular and 13 green cleaners was examined by headspace analysis. Monoterpenes were the most prevalent VOCs, with average total monoterpene concentrations of 8.6 and 25.0 mg L-1 for regular and green cleaners, respectively. Speciated monoterpene emissions were applied to a detailed chemical model to investigate the indoor air chemistry following a typical cleaning event. Green cleaners generally emitted more monoterpenes than regular cleaners, resulting in larger increases in harmful secondary pollutant concentrations following use, such as formaldehyde (up to 7%) and PAN species (up to 6%). However, emissions of the most reactive monoterpenes (α-terpinene, terpinolene and α-phellandrene), were observed more frequently from regular cleaners, resulting in a disproportionately large impact on the concentrations of radical species and secondary pollutants that were formed after cleaning occurred.

Evaluation of the adsorption performance and thermal treatment-associated regeneration of adsorbents for formaldehyde removal.

Indoor air pollution remains a major concern, with formaldehyde (HCHO) a primary contributor due to its long emission period and associated health risks, including skin allergies, coughing, and bronchitis. This study evaluated the adsorption performance and economic efficiency of various adsorbents (biochar, activated carbon, zeolites A, X, and Y) selected for HCHO removal. The impact of thermal treatment on adsorbent regeneration was also assessed. The experimental apparatus featured an adsorption column and HCHO concentration meter with an electrochemical sensor designed for adsorption analysis. Zeolite X exhibited the highest adsorption performance, followed by zeolite A, zeolite Y, activated carbon, and biochar. All adsorbents displayed increased HCHO removal rates with an extended length/diameter (L/D) ratio of the adsorption column. Zeolite A demonstrated the highest economic efficiency, followed by zeolite X, activated carbon, zeolite Y, and biochar. Higher L/D ratios improved economic efficiency and prolonged the replacement cycle (the optimal timing for adsorbent replacement to maintain high adsorption performance). Sensitivity analysis of adsorbent regeneration under varying thermal treatment conditions (150, 120, and 80°C) and durations (60, 45, and 30 min) revealed minimal changes in adsorption efficiency (±3%). The results indicated the potential of adsorbent regeneration under energy-efficient thermal treatment conditions (80°C, 30 min). In conclusion, this study underscores the importance of a comprehensive assessment, considering factors such as adsorption performance, replacement cycle, economic efficiency, and regeneration performance for the selection of optimal adsorbents for HCHO adsorption and removal.Implications: This study underscores the importance of adsorption technology for the removal of formaldehyde and similar volatile organic compounds (VOCs), highlighting the potential of alternative adsorbents, such as environmentally friendly biochar, in addition to traditional strategies, such as activated carbon and zeolites. Our findings demonstrate the feasibility of adsorbent regeneration under energy-efficient thermal treatment conditions. These results hold promise for improving indoor air quality, reducing environmental pollutants, and enhancing responses to air contaminants like fine dust and VOCs.

Anthropogenic, biogenic, and photochemical influences on surface formaldehyde and its significant decadal (2006-2017) decrease in the Lewiston-Clarkston valley of the northwestern United States.

Formaldehyde (HCHO) is a key carcinogen and plays an important role in atmospheric chemistry. Both field measurements and Positive Matrix Factorization (PMF) modeling have been employed to investigate the concentrations and sources of HCHO in the Lewiston-Clarkston (LC) valley of the mountainous northwestern U.S. Different instruments were deployed to measure surface formaldehyde and other related compounds in July of 2016 and 2017. The measurements reveal that the average HCHO concentrations have significantly decreased to 2-5 ppb in the LC valley in comparison to its levels (10-20 ppb) observed in July 2006. This discovery with surface measurements deserves attention given that satellite retrievals showed an increasing long-term trend from 2005 to 2014 in total vertical column density of HCHO in the region, suggesting that satellite instruments may not adequately resolve small valleys in the mountainous region. Our PMF modeling identified four major sources of HCHO in the valley: (1) emissions from a local paper mill, (2) secondary formation and background, (3) biogenic sources, and (4) traffic. This study reveals that the emissions from the paper mill cause high HCHO spikes (6-19 ppb) in the early morning. It is found that biogenic volatile organic compounds (VOCs) in the area are influenced by national forests surrounding the region (e.g., Nez Perce-Clearwater, Umatilla, Wallowa-Whitman, and Idaho Panhandle National Forests). The results provide useful information for developing strategies to control HCHO levels and have implications for future HCHO studies in atmospheric chemistry, which affects secondary aerosols and ozone formation.

Comprehensive interventions to reduce occupational hazards among medical staff in the pathology department of five primary hospitals.

OBJECTIVE: To explore comprehensive interventions to reduce occupational hazards among medical staff in the pathology department of five primary hospitals. METHODS: The indoor air quality in the pathology department of five primary hospitals and the health status of staff were investigated and analyzed. Formaldehyde and benzene concentrations in the technical and diagnostic rooms of the pathology departments were analyzed before and after comprehensive interventions. The Environmental Protection Agency risk assessment paradigm was used to assess the health risks from occupational exposure to benzene and formaldehyde. Consequently, considering the local environment, targeted comprehensive intervention measures were developed, including optimizing management, raising awareness, updating equipment, and replacing reagents. RESULTS: Eye discomfort was higher among technicians in the pathology department than among clinical medical staff (P < 0.05). Before comprehensive interventions, formaldehyde concentrations were higher in the technical room than in the diagnostic room at the five primary hospitals (P < 0.05). However, compared to before interventions, formaldehyde and benzene concentrations in both rooms were significantly lower after comprehensive interventions. Furthermore, although medium risks of occupational exposure to benzene and formaldehyde remained in both rooms before and after comprehensive interventions, the risk values before interventions were higher than after comprehensive interventions. The staff of the technical rooms showed higher risk values that those of the diagnostic rooms before and after comprehensive interventions. Similarly, although hazard quotient (HQ) values for occupational exposure to benzene and formaldehyde were < 1 in both the technical and diagnostic rooms before and after comprehensive interventions, with lower noncarcinogenic risks, the values were higher before than after comprehensive interventions. Moreover, staff in the technical room had higher HQ values before and after comprehensive interventions than those in the diagnostic room. The use of environmentally friendly reagents for the preparation of frozen sections was effective. CONCLUSION: Comprehensive interventions significantly reduced occupational hazards among staff at the pathology department of five primary hospitals, which is of great practical significance to protect the health of staff.

The burden of disease attributable to indoor air pollutants in China from 2000 to 2017.

BACKGROUND: High-level exposure to indoor air pollutants (IAPs) and their corresponding adverse health effects have become a public concern in China in the past 10 years. However, neither national nor provincial level burden of disease attributable to multiple IAPs has been reported for China. This is the first study to estimate and rank the annual burden of disease and the financial costs attributable to targeted residential IAPs at the national and provincial level in China from 2000 to 2017. METHODS: We first did a systematic review and meta-analysis of 117 articles from 37 231 articles identified in major databases, and obtained exposure-response relationships for the candidate IAPs. The exposure levels to these IAPs were then collected by another systematic review of 1864 articles selected from 52 351 articles. After the systematic review, ten IAPs with significant and robust exposure-response relationships and sufficient exposure data were finally targeted: PM2·5, nitrogen dioxide, sulphur dioxide, ozone, carbon monoxide, radon, formaldehyde, benzene, toluene, and p-dichlorobenzene. The annual exposure levels in residences were then evaluated in all 31 provinces in mainland China continuously from 2000 to 2017, using the spatiotemporal Gaussian process regression model to analyse indoor originating IAPs, and the infiltration factor method to analyse outdoor originating IAPs. The disability-adjusted life-years (DALYs) attributable to the targeted IAPs were estimated at both national and provincial levels in China, using the population attributable fraction method. Financial costs were estimated by an adapted human capital approach. FINDINGS: From 2000 to 2017, annual DALYs attributable to the ten IAPs in mainland China decreased from 4620 (95% CI 4070-5040) to 3700 (3210-4090) per 100 000. Nevertheless, in 2017, IAPs still ranked third among all risk factors, and their DALYs and financial costs accounted for 14·1% (95% CI 12·3-15·6) of total DALYs and 3·45% (3·01-3·82) of the gross domestic product. Specifically, the rank of ten targeted IAPs in order of their contribution to DALYs in 2017 was PM2·5, carbon monoxide, radon, benzene, nitrogen dioxide, ozone, sulphur dioxide, formaldehyde, toluene, and p-dichlorobenzene. The DALYs attributable to IAPs were 9·50% higher than those attributable to outdoor air pollution in 2017. For the leading IAP, PM2·5, the DALYs attributable to indoor origins are 18·3% higher than those of outdoor origins. INTERPRETATION: DALYs attributed to IAPs in China have decreased by 20·0% over the past two decades. Even so, they are still much higher than those in the USA and European countries. This study can provide a basis for determining which IAPs to target in various indoor air quality standards and for estimating the health and economic benefits of various indoor air quality control approaches, which will help to reduce the adverse health effects of IAPs in China. FUNDING: The National Key Research and Development Program of China and the National Natural Science Foundation of China.

[Study on formulation and revision of standard limit for formaldehyde in the "Standards for indoor air quality（GB/T 18883-2022）" in China].

Formaldehyde, as an important pollutant in indoor air, has always been of great concern. In the newly issued "Standards for indoor air quality (GB/T 18883-2022)", the standard limit of formaldehyde has been restricted to 0.08 mg/m3. In order to better promote the implementation and application of this new standard, this study reviewed and interpreted the relevant technical content for determining the standard limit, including the indoor concentration and human exposure levels of formaldehyde, the health effects of formaldehyde, and the derivation of safety reference values. It also proposed prospect for the future development and revision of quality standards for formaldehyde in indoor air.

Determination of Urban Formaldehyde Emission Ratios in the Shanghai Megacity.

We analyzed two data sets of atmospheric formaldehyde (FA) at an urban site in the Shanghai megacity during the summer of 2017 and the winter of 2017/18, with the primary objective of determining the emission ratio of formaldehyde versus carbon monoxide (CO). Through the photochemical age method and the minimum R squared (MRS) method, we derived the summer urban formaldehyde release ratios of 3.37 ppbv (ppmv of CO)-1 and 4.04 ppbv (ppmv of CO)-1, respectively. The error of both estimations is within ±20%, indicating the consistency of the results. We recognized the hourly minimum emission ratios determined from the MRS method to be indicative of actual formaldehyde emission ratios. Similarly, the emission ratio in winter is determined to be 2.10 ppbv (ppmv of CO)-1 utilizing the MRS method. The findings provide significant insights into the potential impact of motor vehicle exhaust on formaldehyde emissions in urban areas. This work demonstrates that the formaldehyde emission ratio determined by the MRS method can be used to represent the emissions of the freshest air mass. Formaldehyde photolysis contributed an average of 9% to the free radical primary reaction rate (P(ROx)) as a single chemical species during the daytime in summer, which was lower than the 11% recorded in winter. Formaldehyde emission reduction positively impacts local ozone production, so models describing ozone formation in Shanghai during summer need to reflect these emissions accurately. Evidence of the crucial catalytic role of formaldehyde in particulate matter formation has been confirmed by recent research. A potentially effective way to decrease the incidence of haze days in autumn and winter in the future is therefore to focus on reducing formaldehyde emissions.

[Characteristics and Health Risk Assessment of Volatile Organic Compounds in Different Functional Zones in Baoji in Summer].

The situation of air pollution in Guanzhong Plain has been increasing in recent years; hence, it is very important to study the characteristics of volatile organic compounds (VOCs) and their health risks in urban functional zones. We analyzed 115 VOCs using gas chromatography-mass spectrometry/hydrogen ion flame detector (GC-MS/FID) and high performance liquid chromatography (HPLC) at four sampling sites in the traffic, comprehensive, industrial, and scenic zones of Baoji. We analyzed the main components and key species in the different functional zones. Ozone formation potential (OFP),·OH consumption rate (L·OH), and secondary organic aerosol formation potential (SOAFP) were used to evaluate the environmental impact, and the hazard index (HI) and lifetime cancer risk (LCR) methods were employed. The results revealed that the mean values of φ(TVOCs) in the traffic, comprehensive, industrial, and scenic zones were (59.63±23.85)×10-9, (42.92±11.88)×10-9, (60.27±24.09)×10-9, and (55.54±7.44)×10-9, respectively. The dominant contributors at the traffic zone were alkanes, and those at the other functional zones were OVOCs. Acetaldehyde, acetone, n-butane, and isopentane were abundant at different functional zones. According to the characteristic ratios of VOCs, the average ratio of toluene to benzene (T/B) at the traffic, comprehensive, industrial, and scenic zones were 1.84, 2.39, 1.28, and 1.64, respectively, and the ratio of iso-pentane to n-pentane (i/n) was mainly between 1 and 4. The results indicated that VOCs in Baoji were significantly affected by vehicle emissions and gasoline evaporation, biomass and coal combustion, and industrial coatings and foundry. The ratio of m/p-xylene to ethylbenzene (X/E) was lower than 2 at the four functional zones, and the minimum was 1.79 at the scenic zones; the results revealed that X/E was small, and the aging degree of air masses was high, indicating the influence of regional transport. According to the ratio of formaldehyde to acetaldehyde (C1/C2) and the ratio of acetaldehyde to propanal (C2/C3), it was suggested that there may have been evident anthropogenic emission sources, and the photochemical reaction had an important effect on aldehydes and ketones. Environmental impact assessment results revealed that OVOCs and alkenes contributed significantly to OFP and OFP from large to small was as follows:industrial zone>scenic zone>traffic zone>comprehensive zone. The range of L·OH in each functional zone was 8.77-15.82 s-1, with isoprene contributing the most in the industrial zone and acetaldehyde contributing the most at other functional zones. The SOAFP of each functional zone was as follows:scenic zone>comprehensive zone>traffic zone>industrial zone. Toluene, m/p-xylene, and isoprene were the notable species. According to the health risk assessment of EPA, the HI of toxic VOCs in all functional zones was lower than 1, which was at an acceptable level. However, the number of days with HI>1 in industrial zones accounted for 42.86% of the total sampling days, indicating a high risk. The lifetime carcinogenic risk (LCR) of the traffic, comprehensive, industrial, and scenic zones were 1.83×10-5, 1.21×10-5, 1.85×10-5, and 1.63×10-5, respectively, which were all in grade Ⅲ of the rating system, indicating a high probability of cancer risk. Species with LCR greater than 10-6 were formaldehyde; acetaldehyde; 1,2-dibromoethane; 1,2-dichloroethane; 1,2-dichloropropane; and chloroform.

Refinement and predicting formaldehyde concentrations of indoor fabric: Effects of temperature and humidity.

Indoor air pollution resulting from volatile organic compounds (VOCs) is a significant health concern, especially formaldehyde. Therefore, predicting indoor formaldehyde concentration is essential for environmental control. In this research, the authors develop a thermal and wet coupling calculation model of porous fabric that considers the influence of different phases of wet components and the coupling effect of heat and humidity on formaldehyde migration. We propose a modified calculation method of the formaldehyde mass transfer characteristic parameters of fabric to obtain the diffusion coefficient D and partition coefficient K. The heat and humidity coupling model and formaldehyde mass transfer model of fabric are simultaneously solved, and the authors analyze the influence mechanism of fabric loading rate, fabric type, temperature, and humidity on indoor formaldehyde mass transfer characteristics. We study the variation trend of fabric formaldehyde mass transfer characteristics coefficient and the temporal and spatial distribution of indoor formaldehyde concentration. The theoretical model is applied to practical problems by pre-evaluating the indoor formaldehyde concentration of decorated residential buildings in typical climate areas of China before occupancy. The authors obtain the variation rule of indoor formaldehyde concentration of residential buildings under typical hot and humid climate conditions, building materials, furniture, and fabrics. To provide theoretical support for indoor environmental control and human health protection.

Assessment of atmospheric levels of carbonyls in an urban environment of Argentina.

It is well-documented that carbonyl compounds have adverse effects on human health. On the other hand, these oxygenated volatile organic compounds (OVOCs) are precursors of secondary pollutants such as tropospheric ozone or peroxy acetyl nitrate (PAN). In particular, formaldehyde, the simplest carbonyl, is the most abundant carbonyl in the air generated from the degradation of most volatile organic compounds (VOCs). This work presents for the first time the characterization and determination of levels of carbonyl compounds by passive monitoring performed from April-December 2021 in the city of Córdoba, Argentina, the second most populated Mediterranean city located in the center of the country. Annual concentrations, considering the 11 carbonyls measured, were in the range of 0.13-8.75 µgm-3. Formaldehyde and acetaldehyde were the carbonyls detected in the highest annual average concentrations of 4.44 ± 1.75 µgm-3 and 3.85 ± 1.44 µgm-3, respectively. These carbonyls represent a contribution of around 40-57% on total carbonyls measured. Statistical analysis to determine significant differences and Pearson correlations with the meteorological parameters were performed. Spring and summer were found to be the seasons with the highest carbonyl concentration linked to forest fire episodes, especially in springtime. The values for the C1/C2 and C2/C3 ratios showed that sources of carbonyl formation are anthropogenic. In addition, the prop-Equiv concentration was determined, where formaldehyde and acetaldehyde were the main producers of tropospheric ozone. The ozone formation potential (OFP) showed that spring and summer are the seasons where carbonyls contribute to the formation of tropospheric ozone.This study represents a first approach of the carbonyl concentration in the city and of the influence of meteorological parameters on the behavior of carbonyls.

Simple and fast microderivatization method for determining formaldehyde using narrow-bore liquid chromatography with UV detection.

Formaldehyde is a harmful substance that can cause sick building syndrome and other diseases, such as contact allergy, asthma, leukemia, cancer, and brain/neuron disorders. Formaldehyde is a ubiquitous chemical owing to its use in many common products, including as a preservative in household and personal care products. To prevent overexposure to formaldehyde, a simple method for determining and controlling the formaldehyde content in commercial products is required. In this study, 3-aminoquinoline (3-AQ) was used to derivatize formaldehyde under mild conditions (2 min at 30 °C) without the use of catalysts or activators. The derivatized sample solutions were separated using narrow-bore liquid chromatography with an ultraviolet (UV) detector in a run time of only 5 min. All sample extraction and derivatization protocols were performed on the microliter scale to reduce the use of organic solvents. The linear range for the determination was 5-1000 µg mL-1, with a detection limit of approximately 1 µg mL-1 (2 ng per 2 µL injection). The proposed microscale method was successfully applied to the analysis of formaldehyde in commercial household products.

Pollution characteristics, sources, and photochemical roles of ambient carbonyl compounds in summer of Beijing, China.

Ambient carbonyls are important precursors of radicals and ground-level ozone (O3). In this study, sources, precursors, and impacts on radicals and O3 of carbonyls were investigated based on online observations of volatile organic compounds (VOCs) at an urban site in Beijing during June 2021. Carbonyls accounted for 36% and 42% of mixing ratios and OH reactivity for total measured VOCs, respectively. Formaldehyde was the most abundant carbonyl, with the mean level of 4.13 ± 2.28 ppb. Source apportionment results based on the multi linear regression (MLR) method suggested that secondary production contributed 41%, 25%, 36%, and 30% of formaldehyde, acetaldehyde, propanal, and acetone, respectively. Key precursors of carbonyls were then identified based on the calculation of their production rates. It was found that alkenes contributed 59%-80% of aldehydes production. Impacts of carbonyls on HOx radicals (OH and HO2) and O3 production were explored using a box model based on observations (OBM). Photolysis of HONO, formaldehyde, and O3 were the dominant primary sources of HOx radicals during daytime of O3 pollution days, with average relative contributions of 52%, 28%, and 19% to the total primary production rate of HOx, respectively. Aldehydes accounted for 32% (20% from formaldehyde) of average HOx removal rates. The relative incremental reactivity (RIR) values of NOx determined by the OBM were negative, suggesting that the O3-VOCs-NOx sensitivity was in the VOCs-limited regime. Using the observed concentrations of carbonyls as constraints of OBM, the absolute values of RIR for NOx tended to increase but those for anthropogenic VOCs tended to decrease. Formaldehyde showed the largest RIR value for anthropogenic VOCs during O3 pollution days. These findings indicated the important impacts of carbonyls on O3 production and O3-VOCs-NOx sensitivity.

HPLC and GC Characterization of Dicliptera bupleuroides Aerial Parts and Evaluation of Its Anti-Inflammatory Potential in Vitro, in silico and in Vivo Using Carrageenan and Formalin Induced Inflammation in Rat Models.

The current study aimed to evaluate the anti-inflammatory activity of Dicliptera bupleuroides Nees aerial parts methanol extract and its different fractions namely hexane, chloroform, ethyl acetate and butanol in vitro using cyclooxygenase inhibitory assay (COX-2). In vivo anti-inflammatory evaluation was performed using carrageenan and formalin induced inflammation in rat models followed by molecular docking. High performance liquid chromatography (HPLC) and gas chromatography coupled with mass chromatography (GC/MS) analyses were used for chemical analyses of the tested samples. The tested samples showed significant inhibition in COX-2 inhibitory assay where methanol extract (DBM) showed the highest inhibitory potential at 100 µg/mL estimated by 67.86 %. At a dose of 400 mg/kg, all of the examined samples showed pronounced results in carrageenan induced acute inflammation in rat model at 4th h interval with DBM showed the highest efficiency displaying 65.32 % inhibition as compared to the untreated rats. Formalin model was employed for seven days and DBM exhibited 65.33 % and 69.39 % inhibition at 200 and 400 mg/kg, respectively approaching that of the standard on the 7th day. HPLC revealed the presence of caffeic acid, gallic acid and sinapic acid, quercetin and myricetin in DBM. GC/MS analysis of its hexane fraction revealed the presence of 16 compounds belonging mainly to fatty acids and sterols that account for 85.26 % of the total detected compounds. Molecular docking showed that hexadecanoic acid followed by decanedioic acid and isopropyl myristate showed the best fitting within cyclooxygenase-II (COX-II) while nonacosane followed by hexatriacontane and isopropyl myristate revealed the most pronounced fitting within the 5-lipoxygenase (5-LOX) active sites. Absorption, metabolism, distribution and excretion and toxicity prediction (ADMET/ TOPKAT) concluded that most of the detected compounds showed reasonable pharmacokinetic, pharmacodynamic and toxicity properties that could be further modified to be more suitable for incorporation in pharmaceutical dosage forms combating inflammation and its undesirable consequences.

Personal exposure to aldehydes and potential health risks among schoolchildren in the city.

Schoolchildren are sensitive to airborne aldehyde exposures. The knowledge regarding inhalation exposure to aldehydes and the factors influencing exposure in schoolchildren is limited. This study aimed to assess the variability and potential health risks of exposure to aldehydes (including formaldehyde) in schoolchildren. The important factors affecting personal exposure to aldehydes were also explored. Forty schoolchildren were recruited from the urban and suburban areas of Taiwan for aldehyde samplings and questionnaire surveys. Personal and indoor home samples of aldehydes were collected simultaneously during warm and cold seasons. We also identified the potential variables associated with aldehyde exposure based on the participant's responses to the questionnaires using mixed-effects models. The dominant three abundant aldehydes identified in personal exposure samples were formaldehyde (geometric mean, GM = 12.2 µg/m3), acetaldehyde (GM = 5.53 µg/m3), and hexaldehyde (GM = 8.79 µg/m3), accounting for approximately 80% of the total selected aldehydes. Higher personal exposure to aldehydes was observed during the warm season. Moreover, the within-subject variance was predominant, accounting for 66.6 to > 99.9% of the total variance in exposure. Schoolchildren had a high probability of overexposure to formaldehyde and acrolein, which resulted in an incremental lifetime cancer risk of 1.59 × 10-4 (95th percentile = 4.64 × 10-4). Season, location, household refurbishment, and indoor ventilation variables were significantly associated with personal exposure to aldehydes. The results can improve our understanding of aldehyde exposure among schoolchildren to propose mitigation strategies. These findings may be applied to further epidemiological studies.

Feed intake and milk yield and composition of lactating dairy goats in response to partial substitution of soybean meal for formaldehyde-treated sesame meal in the diet.

This study was conducted to evaluate the effect of substitution of soybean meal (SBM) for formaldehyde-treated sesame meal (FTSM) on nutrient intake and digestibility, ruminal and blood parameters and milk production and composition in lactating Murciano-Granadina goats. Forty lactating goats were randomly assigned to one of the following four treatments: (1) diet with 16.5% CP, containing SBM (CON); (2) diet with 16.5% CP, containing untreated SM (USM); (3) diet with 16.5% CP, containing FTSM (FT); and (4) diet with 14.5% CP containing FTSM (LPFT). The results showed that nutrient intake was highest in the FT group (p < 0.001), while it was similar between the CON and LPFT groups, except for the intake of CP, which was higher in the CON group. The FT and LPFT had lower ruminal pH compared to CON and USM groups (p < 0.001), with goats in group FT having the highest volatile fatty acids (VFA) production (p < 0.001). The highest propionate concentration was observed in the LPFT treatment (p < 0.001), followed by the FT, CON, and USM treatments. Goats offered USM and LPFT treatments presented the highest and lowest acetate: propionate values, respectively, among the experimental groups (p < 0.001). The results also showed that LPFT goats had the lowest blood urea nitrogen (BUN) level (p = 0.004), while FT goats presented a lower non-esterified FA (NEFA) level compared with CON and LPFT goats (p = 0.01). Goats offered the FT diet had the highest milk yield (p = 0.002) and energy-corrected milk yield (p < 0.001) among all dietary groups. The highest milk fat (p < 0.001), protein (p = 0.001), lactose (p = 0.007), total solids (p = 0.003), and solids-not-fat (SNF) (p = 0.003) contents were observed in FT goats, which didn't differ from USM goats. The inclusion of formaldehyde-treated SM increased the percentage of C18:3 (p < 0.001) and C20:1 (p = 0.04) FAs compared with USM and CON treatments. Milk from USM, FT, and LPFT goats had lower levels of saturated (p < 0.001) and medium-chain FAs (p = 0.014) compared with CON goats, whereas milk from CON goats had lower levels of unsaturated, monounsaturated, and long-chain FAs compared to other groups (p < 0.001). The lowest and the highest concentrations of polyunsaturated FAs were observed in CON and LPFT goats, respectively (p = 0.001). It can be concluded that SBM can be advantageously replaced by formaldehyde-treated SM in the diet as a feasible alternative to improve feed intake and production performance of dairy goats.